Average Temperature on Contact Tool-Workpiece by Milling (CROSBI ID 512556)
Prilog sa skupa u zborniku | stručni rad | međunarodna recenzija
Podaci o odgovornosti
Cebalo, Roko ; Stoić, Antun ; Jurjević, Mate
engleski
Average Temperature on Contact Tool-Workpiece by Milling
The heat generating along the contact of milling cutter and workpiece has an influence on milling process. Average temperature on contact is influenced with material of workpiece and with cutting conditions. There are a lot of influencing parameters wich increase this temperature. The most significant influence arise from angle of milling edge and cutting speed. Test are conducted with HSS milling cutter on heat treated alloyed steel Č7432 both on up-cut and down-cut milling. Results of testing the influence of lip angle and other parameters on average temperature on milling cutter-workpiece contact are shown in this paper.
temperature; cutting; milling; lip angle
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
I-49 - I-58-x.
2005.
objavljeno
Podaci o matičnoj publikaciji
Proceeding of 10th International Scientific Conference on Production Engineering
Cebalo, Roko ; Schulz, Herbert
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS)
Podaci o skupu
10th International Scientific Conference on Production Engineeringh - CIM 2005
predavanje
15.06.2005-17.06.2005
Lumbarda, Hrvatska