Napredna pretraga

Pregled bibliografske jedinice broj: 219333

Dynamic Analysis of Machine and Worpiece Instability in Turning


Ergić, Todor; Stoić, Antun; Konjatić, Pejo
Dynamic Analysis of Machine and Worpiece Instability in Turning // Proceedings of the 4th International Conference Advanced Technologies for Developing Contries ATDC 2005 / Kljain, Milan ; Katalinić, Branko ; Budić, Ivan (ur.).
Slavonski Brod: Grafika Osijek, 2005. str. 497-502 (poster, međunarodna recenzija, cjeloviti rad (in extenso), ostalo)


Naslov
Dynamic Analysis of Machine and Worpiece Instability in Turning

Autori
Ergić, Todor ; Stoić, Antun ; Konjatić, Pejo

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), ostalo

Izvornik
Proceedings of the 4th International Conference Advanced Technologies for Developing Contries ATDC 2005 / Kljain, Milan ; Katalinić, Branko ; Budić, Ivan - Slavonski Brod : Grafika Osijek, 2005, 497-502

Skup
ATDC'05-International Conference Advanced Technologies for Developing Contries

Mjesto i datum
Slavonski Brod, Hrvatska, 21-24.9.2005

Vrsta sudjelovanja
Poster

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Self-exited vibration; natural frequencies; dynamic parameters; turning; machining

Sažetak
Dynamic parameters in particular, the machining state monitoring and diagnosis during the cutting operation, which are indispensable to the stability and the automation of manufacturing process as well as the high accuracy of machining, has become increasingly important. Dynamic features (e.g. mass, stiffness and damping) of machine and workpiece in turning alter during cutting and can affect stability of machining process. A kind of self-exited vibration, which is occurred during machining an machine tools, is called chatter. Machining with chatter is an undesirable phenomenon, because it causes the surface of the workpiece to be damaged. Besides, tool breakage and the amortization of other machine parts are the results of this phenomenon. As an example, a system of turning machine and one turning workpiece is analyzed using method of identification and dynamic features of machining system. On the basis of collected data stability of machining process is shown.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Projekt / tema
0152014
0152015

Ustanove
Sveučilište u Osijeku, Odjel za matematiku