Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 218316

Human Vibration Transmitted to the Framesaw Operator


Goglia, Vlado; Grbac, Ivica; Đukić, Igor
Human Vibration Transmitted to the Framesaw Operator // IUFRO XXII World Congres
Brisbane, Australia, 2005. (predavanje, međunarodna recenzija, neobjavljeni rad, znanstveni)


CROSBI ID: 218316 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Human Vibration Transmitted to the Framesaw Operator

Autori
Goglia, Vlado ; Grbac, Ivica ; Đukić, Igor

Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, neobjavljeni rad, znanstveni

Skup
IUFRO XXII World Congres

Mjesto i datum
Brisbane, Australia, 09-13.08.2005

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Ergonomics; Health risk; Hand-arm vibration; Whole-body vibration; Exposure limits

Sažetak
The paper reports and analyses the results of vibration measurement carried out on a framesaw. Vibrations were measured on both the left and the right handle as well as on the operators seat acording to ISO 8662-8. The measured levels of the weighted accelerations of the vibration were compared to the daily exposure limits according to ISO 5349-1 and ISO 2631-1. Daily exposures were determined according to the same standards. There are more than forty framesaws at the moment in use in Croatia in use in Croatia and many framesaw operators have serious hands and spine problems. The complex measurements were carried out in order to find out the vibration level at the operators working area. The paper reports the measurement results of the vibration transmitted to the framesaw operator during an ordinary working day. Vibration was measured at all operations performd during the normal framesaw working cycle. The weighted r.m.s. acceleration was also calculated and the duration of the each single framesaw operation was measured. The energy-equivalent vibration level corresponding to the total duration of exposure was calculated, too. The measurement results showed that the framesaw operator, under the given measuring conditions, is exposed to a vibration level higher than recomended daily exposure limits. Also, the energy-equivalent vibration level is higher than the recommended limits.

Izvorni jezik
Engleski

Znanstvena područja
Javno zdravstvo i zdravstvena zaštita, Šumarstvo



POVEZANOST RADA


Projekti:
0068139

Ustanove:
Šumarski fakultet, Zagreb

Profili:

Avatar Url Igor Đukić (autor)

Avatar Url Ivica Grbac (autor)

Avatar Url Vlado Goglia (autor)

Citiraj ovu publikaciju

Goglia, Vlado; Grbac, Ivica; Đukić, Igor
Human Vibration Transmitted to the Framesaw Operator // IUFRO XXII World Congres
Brisbane, Australia, 2005. (predavanje, međunarodna recenzija, neobjavljeni rad, znanstveni)
Goglia, V., Grbac, I. & Đukić, I. (2005) Human Vibration Transmitted to the Framesaw Operator. U: IUFRO XXII World Congres.
@article{article, year = {2005}, keywords = {Ergonomics, Health risk, Hand-arm vibration, Whole-body vibration, Exposure limits}, title = {Human Vibration Transmitted to the Framesaw Operator}, keyword = {Ergonomics, Health risk, Hand-arm vibration, Whole-body vibration, Exposure limits}, publisherplace = {Brisbane, Australia} }




Contrast
Increase Font
Decrease Font
Dyslexic Font