Influence of weapon barrel superheat on structure and hardness of material (CROSBI ID 511052)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Jakopčić, Mirko
engleski
Influence of weapon barrel superheat on structure and hardness of material
The paper presents the procedures and the results of the experiment which researches the influence of weapon barrel superheat on the structure and hardness of barrel material. The superheat of weapon barrel appears when the allowed rate of fire is crossed. The surface layers of the barrel bore may be heated over the temperature of 500 C to 1000  C for that. Therefore the samples of the chosen artillery weapon barrel were made. The samples were tempering at 600  C, 700  C, 800  C, 900  C and 1000  C, over a period of one hour and air cooling. The paper presents the procedures and results of the samples metallographic analysis and the results of the measured hardness of the samples after tempering and cooling. The results of experiment shown in this paper can contribute to the conclusion about wear resistance change therefore the weapon barrel superheat by the firing process.
weapon barrel; superheat; microstructure; hardness
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
265-269-x.
2005.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of 4th DAAAM International Conference on Advanced Technologies for Developing Countries
Kljajin, Milan ; Katalinić, Branko ; Budić, Ivan
Slavonski Brod: Strojarski fakultet Sveučilišta u Slavonskom Brodu
Podaci o skupu
4th DAAAM International Conference on Advanced Technologies for Developing Countries
poster
21.09.2005-24.09.2005
Osijek, Hrvatska