Napredna pretraga

Pregled bibliografske jedinice broj: 21599

Analysis of the Concave-Convex Contact of Cylindrical Bodies


Siminiati, Dubravka; Mrakovčić, Tomislav
Analysis of the Concave-Convex Contact of Cylindrical Bodies // Proceedings of the International Conference Theory and Practice of Gearing / Goldfarb, V.I. (ur.).
Izhevsk: IFTOMM, 1998. str. 79-84 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


Naslov
Analysis of the Concave-Convex Contact of Cylindrical Bodies

Autori
Siminiati, Dubravka ; Mrakovčić, Tomislav

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings of the International Conference Theory and Practice of Gearing / Goldfarb, V.I. - Izhevsk : IFTOMM, 1998, 79-84

Skup
Internal Conference Theory and Practice of Gearing

Mjesto i datum
Iževsk, Rusija, 18-20.11.1998

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Concave-Convex Contact; Cylindrical Body; FEM; Photoelastic Model

Sažetak
An analysis of concave-convex contact of two conform cylindrical bodies that are loaded with radial force is presented in the paper. It is known that a stress concentration is produced as the result of the contact of cylindrical bodies, where the critical point is placed under the surface of the body in contact pressure zone. Such area reprersents a potential risk of the initial crack appearance in material. Adequate experiments were performed on photoelastic model. Contact of the same contact pairs was simulated using two numerical methods: finite element method and pressure elements. Obtained results provide the basis for determination of the amplitude and position of maximum equivalent stress depending on the degree of conformity of cylindrical bodies in contact.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Projekt / tema
069006
069008

Ustanove
Tehnički fakultet, Rijeka