Napredna pretraga

Pregled bibliografske jedinice broj: 212385

MATHEMATICAL MODELLING OF CUTTING FORCES IN THE LONGITUDINAL TURNING PROCESS


Cebalo, Roko; Bajić, Dražen; Bilić, Boženko
MATHEMATICAL MODELLING OF CUTTING FORCES IN THE LONGITUDINAL TURNING PROCESS // 10th International Scientific Conference on Production Engineering / Cebalo, Roko ; Schulz, Herbert (ur.).
Zagreb: Croatian Association of Production Engineering, 2005. str. I31-I40 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


Naslov
MATHEMATICAL MODELLING OF CUTTING FORCES IN THE LONGITUDINAL TURNING PROCESS

Autori
Cebalo, Roko ; Bajić, Dražen ; Bilić, Boženko

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
10th International Scientific Conference on Production Engineering / Cebalo, Roko ; Schulz, Herbert - Zagreb : Croatian Association of Production Engineering, 2005, I31-I40

ISBN
953-97181-6-3

Skup
Computer Integrated Manufacturing and High Speed Machining

Mjesto i datum
Lumbarda, Hrvatska, 15-17.06.2005

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Cutting parameters; longitudinal turning; cutting forces

Sažetak
Cutting forces are one of the most basic productivity features and as such represent important criteria in the optimization and control of a cutting process. This paper deals with the influence analysis of cutting parameters (cutting speed, depth and feed) on the cutting forces for the case of longitudinal turning. Second order central composite experimental design was used for the analysis and mathematical modeling. The outputs from the mathematical model were compared with the outputs resulting from the use of Kienzl’ s tangential cutting force equation.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Projekt / tema
0023005

Ustanove
Fakultet elektrotehnike, strojarstva i brodogradnje, Split