THE ANALYSIS OF FAILURES OF THE LAMINATED COMPOSITE STRUCTURES WITH HOLES (CROSBI ID 509249)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Vnučec, Zdravko ; Kljajin, Milan
engleski
THE ANALYSIS OF FAILURES OF THE LAMINATED COMPOSITE STRUCTURES WITH HOLES
In this paper, applications of theoretical, numerical (FEM) and experimental methods to investigation of fracture of laminated composite plane structures with hole are described. The ultimate loading capacities until fracture for the strips with central holes made from laminated composite material are obtained. Especially attention is gives to the stress distribution in the region beside the point of initiated crack on contour of holes in structure. Results of numerical (FEM) and experimental stress analysis (photoelastic method) in plane structures with holes subjected to uniaxial loading are presented in tables and graphically in figures and photos.
failure; stress concentration; laminated composite structure
COBISS.BH-ID 14361094
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
1029-1032-x.
2005.
objavljeno
Podaci o matičnoj publikaciji
Proceedings / 9th International Research/Expert Conference “ ; ; Trends in the Development of Machinery and Associated Technology” ; ; ; TMT 2005, ISBN 9958-617-28-5
Dr. Sabahudin Ekinović, dr. Senay Yalcin, dr. Joan Vivancos Calvet
Antalya: Faculty of Mechanical Engineering in Zenica, Bosnia and Herzegovina, etc.
Podaci o skupu
9th International Research/Expert Conference, “ ; Trends in the Development of Machinery and Associated Technology” ; TMT 2005,
predavanje
26.09.2005-30.09.2005
Antalya, Turska
