Monitoring of leaching process in foundry sand and mould mixture-H2O system (CROSBI ID 509077)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Rastovčan-Mioč, Alenka ; Ćurković, Lidija ; Perković, Stojanka
engleski
Monitoring of leaching process in foundry sand and mould mixture-H2O system
Over 90 % of iron alloy castings are made in disposable moulds i.e. in raw synthetic moulds. Raw mould mixture is applied in all production process types. Mould mixture is composed of sand as the basic component, binding material, water and additives. Sand particles take up 70 to 95 % of the total mould material in the mixture. The most frequently used sands include quartz sand, chromite sand and olivine sand. Preliminary study of leaching behaviour in foundry sand and mould mixture-H2O system has been studied through electrical conductivity measurements, complemented by measurements of the leaching concentrations of Cr3+, Al3+, Si4+, Ca2+, Mg2+, Fe3 and pH value in eluates after the leaching process.
foundry sand; mould mixture; leaching
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
869-872-x.
2005.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of 9th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" TMT 2005
Ekinović, Sabauhudin ; Yalcin, Senay ; Vivancos Calvet, Joan
Zenica: Mašinski fakultet Univerziteta u Zenici
Podaci o skupu
9th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" TMT 2005
predavanje
26.09.2005-30.09.2005
Antalya, Turska