Reclaiming of moulding compound (CROSBI ID 508948)
Prilog sa skupa u zborniku | ostalo
Podaci o odgovornosti
Budić, Ivan ; Novoselović, Daniel
engleski
Reclaiming of moulding compound
The same mold sand mixture is used several times in the same production cycle. Quality of the mold mixture deteriorates with increased number of cycles, so that finally it becomes unusable. With addition of the new binder there is constant increase in thickness of the coating around the sand grain, which results in creation of lumps. Regeneration of sand mixture aims at removal of the coating, because underneath the coating there is a new silica sand grain. Another goal is to get rid of dust from the mold sand. Regeneration process may save up to 70% of new silica sand.
mold sand regeneration; heat treating; mechanical scrubbing
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
213-216.
2005.
objavljeno
Podaci o matičnoj publikaciji
Proceeding of the 4th DAAAM International Conference of Advanced Technologies for Developing Countries
Kljajin, Milan ; Katalinić, Branko ; Budić, Ivan
Slavonski Brod : Beč: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod ; DAAAM International
Podaci o skupu
DAAAM International Conference of Advanced Technologies for Developing Countries (4 ; 2005)
poster
21.09.2005-24.09.2005
Slavonski Brod, Hrvatska