SS 316L - The Passivation Process in the Farmaceutical Industry (CROSBI ID 468188)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Marijan, Dražen ; Tudja, Marijan
engleski
SS 316L - The Passivation Process in the Farmaceutical Industry
External contamination, human error, direct contact with iron or chlorides, or direct exposure to contaminated atmosphere and especially welding processes are the reasons for performing the passivation on the equipment surface made of austenitic stainless steel used in pharmaceutical industry. The "passivation process" is used here to indicate a surface condition produced by oxidation of the alloy surface. In this work, passivation phenomena have been investigated on the surface of the pharmaceutical system for water for injection (WFI) made of SS-316L.
Stainless Steel-316 L; passivation process; pharmaceutical system for water for injection
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
85-87-x.
1998.
objavljeno
Podaci o matičnoj publikaciji
Zbornik radova Symposium on Corrosion Control by Coatings, Cathodic Protection and Inhibitors
Prof. Šarc-Lahodny, O.
Zagreb: Hrvatska akademija znanosti i umjetnosti (HAZU)
Podaci o skupu
Symposium on Corrosion Control by Coatings, Cathodic Protection and Inhibitors
predavanje
04.10.1998-07.10.1998
Dubrovnik, Hrvatska