Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 206273

Testing of machinability of mould steel 40CrMnMo7 using genetic algorithm


Stoić, Antun; Kopač, Janez; Cukor, Goran
Testing of machinability of mould steel 40CrMnMo7 using genetic algorithm // Journal of materials processing technology, 164-165 (2005), 1624-1630 (međunarodna recenzija, članak, znanstveni)


CROSBI ID: 206273 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Testing of machinability of mould steel 40CrMnMo7 using genetic algorithm

Autori
Stoić, Antun ; Kopač, Janez ; Cukor, Goran

Izvornik
Journal of materials processing technology (0924-0136) 164-165 (2005); 1624-1630

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
machinability; goal function; mathematical model; genetic algorithm

Sažetak
This paper deals with testing of hard materials machinability by high speed turning process and influence of cutting parameters on machinability rates. To determine machinability rates, surface roughness, tool wear and cutting force components were measured. In accordance with expected influence of certain parameter on machinability, experiments were designed and performed to determine mathematical models of the measured values over full response range. Obtained mathematical models were used for determination of machinability index and optimization of the parameters. Machinability was defined from input parameters of the process, and consists of one or several subfunctional machinability indexes. Results of the testing can be used for more effective use of the machine tool performances, as well as for extension of the machinability testing of hard materials in different cutting conditions.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Projekti:
0069020

Ustanove:
Tehnički fakultet, Rijeka

Profili:

Avatar Url Goran Cukor (autor)

Avatar Url Antun Stoić (autor)

Citiraj ovu publikaciju

Stoić, Antun; Kopač, Janez; Cukor, Goran
Testing of machinability of mould steel 40CrMnMo7 using genetic algorithm // Journal of materials processing technology, 164-165 (2005), 1624-1630 (međunarodna recenzija, članak, znanstveni)
Stoić, A., Kopač, J. & Cukor, G. (2005) Testing of machinability of mould steel 40CrMnMo7 using genetic algorithm. Journal of materials processing technology, 164-165, 1624-1630.
@article{article, year = {2005}, pages = {1624-1630}, keywords = {machinability, goal function, mathematical model, genetic algorithm}, journal = {Journal of materials processing technology}, volume = {164-165}, issn = {0924-0136}, title = {Testing of machinability of mould steel 40CrMnMo7 using genetic algorithm}, keyword = {machinability, goal function, mathematical model, genetic algorithm} }

Časopis indeksira:


  • Current Contents Connect (CCC)
  • Web of Science Core Collection (WoSCC)
    • Science Citation Index Expanded (SCI-EXP)
    • SCI-EXP, SSCI i/ili A&HCI
  • Scopus





Contrast
Increase Font
Decrease Font
Dyslexic Font