Napredna pretraga

Pregled bibliografske jedinice broj: 203834

Rapid Prototyping and Rapid Machining of Medical Implants


Raos, Pero; Stoić, Antun; Lucić, Mirjana
Rapid Prototyping and Rapid Machining of Medical Implants // Proceedings of the 4th DAAAM International Conference on Advanced Technologies for Developing Countries / Kljajin, Milan ; Katalinić, Branko ; Budić, Ivan (ur.).
Slavonski Brod, Vienna: University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, DAAAM International Vienna, 2005. str. 293-300 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


Naslov
Rapid Prototyping and Rapid Machining of Medical Implants

Autori
Raos, Pero ; Stoić, Antun ; Lucić, Mirjana

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings of the 4th DAAAM International Conference on Advanced Technologies for Developing Countries / Kljajin, Milan ; Katalinić, Branko ; Budić, Ivan - Slavonski Brod, Vienna : University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, DAAAM International Vienna, 2005, 293-300

Skup
4th DAAAM International Conference on Advanced Technologies for Developing Countries, ATDC'05

Mjesto i datum
Slavonski Brod, Hrvatska, 21-24.09.2005

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Medical implants; rapid prototyping; machining

Sažetak
Concerning the implants, medical models obtained by RP are normally used indirectly, as masters, to produce prosthesis in biocompatible conventional materials (e.g. titanium, cobalt-chrome alloys, medical-grade aluminum, medical-grade silicone etc.) mainly by casting and spray metal molding. However, RP technology has the ability to fabricate models with complex geometric forms, and so is very suitable to reproduce the intricate forms of human body. By using a RP models, visualization of intricate and hidden details of traumas by surgeon is enhanced. Some recent researches aiming to improve the use of RP in the production of medical implants are directed toward producing implants of biocompatible materials directly in the RP process. Medical scanning techniques (e.g. CT, MRI etc.) and computer aided design and manufacturing of the products, widely applied in industry, are feasible to take a place in medicine also to improve medical surgery results. In the paper, a possible approach in implant manufacturing based on CT-scanning, computer modelling and machining process aiming to obtain customized implants of unique geometry will be introduced. This approach will be illustrated by a case study of manufacturing of hip bone RP model and stainless steel implant.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Projekt / tema
0152011
TP-03/0152-03

Ustanove
Strojarski fakultet, Slavonski Brod