Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Possibilities of cost effective plasma cutting application (CROSBI ID 508247)

Prilog sa skupa u zborniku | stručni rad | međunarodna recenzija

Samardžić, Ivan ; Stoić, Antun ; Klarić, Štefanija ; Pavić, Josip Possibilities of cost effective plasma cutting application // ATDC'05 Proceedings of the 4th DAAAM International Conference on Advanced Technologies for Developing Countries / Kljajin, Milan ; Katalinić, Branko ; Budić, Ivan (ur.). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, DAAAM International, Vienna, 2005. str. 307-312-x

Podaci o odgovornosti

Samardžić, Ivan ; Stoić, Antun ; Klarić, Štefanija ; Pavić, Josip

engleski

Possibilities of cost effective plasma cutting application

The paper explains specifics of the plasma cutting technology from the cost effective criteria and possible surface quality achievements point of view. Plasma technology had great improvements in the last several years. Today, it is possible to achieve very fine cutting surface and very precise cutting tolerance which are comparable with laser cutting surface and cutting tolerance. The plasma cutting equipment costs are lower then for the laser cutting, but plasma cutting require additional costs related to human and environment protection. In this paper authors present overview of plasma cutting technology application in our practice, possibilities of use in our circumstances and application example of simple air plasma equipment for cutting different engineering materials.

Plasma; cutting; cost effective application; cutting tolerances

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

307-312-x.

2005.

nije evidentirano

objavljeno

Podaci o matičnoj publikaciji

ATDC'05 Proceedings of the 4th DAAAM International Conference on Advanced Technologies for Developing Countries

Kljajin, Milan ; Katalinić, Branko ; Budić, Ivan

Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, DAAAM International, Vienna

Podaci o skupu

Danube Adria Association for Automation and Manufacturing International Conference on Advanced Technologies for Developing Countries

predavanje

21.09.2005-24.09.2005

Slavonski Brod, Hrvatska

Povezanost rada

Strojarstvo