The Surface Roughness By Peripheral Or Slab Milling (CROSBI ID 507118)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Peterka, Jozef ; Lipa, Zdenek ; Udiljak, Toma
engleski
The Surface Roughness By Peripheral Or Slab Milling
Surface roughness is one of the values describing quality of the machined surface. It significantly influences the physical and chemical properties of the surface, and has big importance for product exploitation phase. Therefore it is necessary to develop techniques to predict the surface roughness before machining, in order to select machining parameters that will keep required surface roughness and preserve product quality. Mathematical models for ideal surface roughness at peripheral or slab milling are not very frequently presented in technical literature and university textbooks, and when have, the problem is usually simplified and simplified relations for calculations of theoretical surface roughness are used. This paper represents contribution for improved calculation of surface roughness parameters Rz and Ra.
surface roughness; milling; slab milling
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
I-141 - I-148-x.
2005.
objavljeno
Podaci o matičnoj publikaciji
CIM 2005
Cebalo, R. ; Schulz, H.
Zagreb: Vedograf
Podaci o skupu
CIM 2005 Computer Integrated Manufacturing and High Speed Machining
predavanje
15.06.2005-17.06.2005
Lumbarda, Hrvatska