Napredna pretraga

Pregled bibliografske jedinice broj: 181375

Possible ways of taking over perpendicular stresses


Haiman, Miljenko
Possible ways of taking over perpendicular stresses // Proceedings of the 8th WCTE 2004 / Alpo Ranta-Maunus (ur.).
Helsinki, Finland: VTT Technical Research Centre of Finland, 2004. str. 373-376 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


Naslov
Possible ways of taking over perpendicular stresses

Autori
Haiman, Miljenko

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings of the 8th WCTE 2004 / Alpo Ranta-Maunus - Helsinki, Finland : VTT Technical Research Centre of Finland, 2004, 373-376

Skup
8th World Conference on Timber Engineering

Mjesto i datum
Lahti, Finska, 14-17.06.2004.

Vrsta sudjelovanja
Poster

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Glulam timber; perpendicular stresses; CFRP plates; FEA modeling

Sažetak
This paper presents the results of an analysis of tests of taking over perpendicular stresses by means of CFRP plates. Parallel with the lab tests, the numerical modelling was carried out by means of COSMOS/M software for lab-tested cases. Based on these analyses, the other numerical analyses were carried out that show the possibility of application of CFRP plates in taking over perpendicular stresses. The paper presents FEM analysis results on a 3D numerical model. The lab tests were conducted at the Laboratory of Technical Mechanics of the Faculty of Civil Engineering, University of Zagreb.

Izvorni jezik
Engleski

Znanstvena područja
Građevinarstvo



POVEZANOST RADA


Projekt / tema
0082202

Autor s matičnim brojem:
Miljenko Haiman, (47142)