Modification of plywood using composite materials (CROSBI ID 503568)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Kljak, Jaroslav ; Brezović, Mladen ; Pervan, Stjepan
engleski
Modification of plywood using composite materials
The subject of this study was the influence of composite materials on the stress distribution in certain plies of plywood panel. The stiffness and the displacement, respectively, were taken as the basic criteria in order to determine the appropriateness of composite materials for plywood modification. In addition, the combinations of fibreglass implementation into plywood panel, with regard to different wood species were analysed. Laboratory plywood panels, homogeneous and composite, were prepared and the stress distribution was analysed using the finite element method. According to the results obtained the influence of fibreglass to the increased stiffness of the panel increase is evident, as a result of strain and Von Mises stress decrease in veneer plies of composite plywood. In addition, a greater impact of fibreglass on the stress modification was established on poplar plywood panels than on beech plywood panels.
veneer plywood; composite plywood; fibreglass; finite element method
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
75-79-x.
2004.
objavljeno
Podaci o matičnoj publikaciji
Trends in design, construction and technology of wooden products
Prof. dr. sc. Ivica Grbac
Zagreb: UFI Pariz, Šumarski fakultet
Podaci o skupu
Trends in design, construction and technology of wooden products
predavanje
15.10.2004-15.10.2004
Zagreb, Hrvatska