Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 165588

Dynamic Characteristic of the Cutting Force Measuring System in Milling


Kuljanić, Elso; Sortino, Marco
Dynamic Characteristic of the Cutting Force Measuring System in Milling // 4th CIRP-ICME'04 / Teti, R. (ur.).
Sorrento (Naples): University of Naples "Federico II", 2004. str. 425-430 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


CROSBI ID: 165588 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Dynamic Characteristic of the Cutting Force Measuring System in Milling

Autori
Kuljanić, Elso ; Sortino, Marco

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
4th CIRP-ICME'04 / Teti, R. - Sorrento (Naples) : University of Naples "Federico II", 2004, 425-430

Skup
4th CIRP International Seminar on Intelligent Computation in Manufacturing Engineering

Mjesto i datum
Sorrento (Naples), Italija, 30.06.-02.07.2004

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Milling; Cutting Force; Vibrations; Tool Condition Monitoring

Sažetak
A spring-damper-mass model of the tooling structure with rotating dynamometer is presented. The proposed mathematical model proves the effect of cutting parameters on the frequency-transfer response of the measurement chain, i.e. on the cutting force signals behavior. Milling experiments have been carried out to investigate the effect of the cutting parameters on the measured cutting force signals. The obtained experimental results are in good accordance to the model prediction.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Projekti:
0069020

Profili:

Avatar Url Elso Kuljanić (autor)

Citiraj ovu publikaciju

Kuljanić, Elso; Sortino, Marco
Dynamic Characteristic of the Cutting Force Measuring System in Milling // 4th CIRP-ICME'04 / Teti, R. (ur.).
Sorrento (Naples): University of Naples "Federico II", 2004. str. 425-430 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
Kuljanić, E. & Sortino, M. (2004) Dynamic Characteristic of the Cutting Force Measuring System in Milling. U: Teti, R. (ur.)4th CIRP-ICME'04.
@article{article, editor = {Teti, R.}, year = {2004}, pages = {425-430}, keywords = {Milling, Cutting Force, Vibrations, Tool Condition Monitoring}, title = {Dynamic Characteristic of the Cutting Force Measuring System in Milling}, keyword = {Milling, Cutting Force, Vibrations, Tool Condition Monitoring}, publisher = {University of Naples "Federico II"}, publisherplace = {Sorrento (Naples), Italija} }




Contrast
Increase Font
Decrease Font
Dyslexic Font