Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Comparison of a Different Implicit Time-integration Methods for the Numerical Solving of Contact Problem of the Rotor in Two Dry Friction Bearings (CROSBI ID 499211)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Žigulić, Roberto ; Braut, Sanjin ; Skoblar, Ante ; Butković, Mirko Comparison of a Different Implicit Time-integration Methods for the Numerical Solving of Contact Problem of the Rotor in Two Dry Friction Bearings // The 11th World Congress in Mechanism and Machine Science, Proceedings / Tian Huang (ur.). Tianjin: China Machine Press, 2004. str. 2148-2152-x

Podaci o odgovornosti

Žigulić, Roberto ; Braut, Sanjin ; Skoblar, Ante ; Butković, Mirko

engleski

Comparison of a Different Implicit Time-integration Methods for the Numerical Solving of Contact Problem of the Rotor in Two Dry Friction Bearings

In the paper the determination of transient nonlinear multidisc rotor response, whirling with slip on the vibrating stator, is shown. Some results and experiences in using HHT alpha, WBZ alpha and generalized alpha method, for numerical obtaining of response of run-down rotor during the contact with vibrating stator in the dry friction bearings, are given. The numerical stability, and accuracy of these methods is compared. Special attention is paid to the possibility of using the adaptive time step calculation. Results of calculations, in the form of rotor displacement amplitudes in horizontal and vertical directions as well in the form of whirl orbits is compared with experimental results obtained on the test rig.

Rotordynamics; Generalized alpha method; Adaptive time step; Dry friction bearings

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

2148-2152-x.

2004.

objavljeno

Podaci o matičnoj publikaciji

The 11th World Congress in Mechanism and Machine Science, Proceedings

Tian Huang

Tianjin: China Machine Press

Podaci o skupu

The 11th World Congress in Mechanism and Machine Science, Proceedings

predavanje

01.04.2004-04.04.2004

Tianjin, Kina

Povezanost rada

Strojarstvo