Napredna pretraga

Pregled bibliografske jedinice broj: 158765

The effect of Thermal Treatment on Structure and Mechnaical Properties of Composite, Condensing from a Steam Phase, Material of the System Cu-Zr-Y-Mo


Grechanyuk, N.; Osokin, V.; Grechanyuk, I.; Mamuzić, Ilija; Bukhanovskii, V.V.
The effect of Thermal Treatment on Structure and Mechnaical Properties of Composite, Condensing from a Steam Phase, Material of the System Cu-Zr-Y-Mo // Materials and Metallurgy, Summaries of Lectures / Mamuzić, Ilija (ur.).
Zagreb: Hrvatsko metalurško društvo, 2004. str. 216-216 (poster, međunarodna recenzija, sažetak, znanstveni)


Naslov
The effect of Thermal Treatment on Structure and Mechnaical Properties of Composite, Condensing from a Steam Phase, Material of the System Cu-Zr-Y-Mo

Autori
Grechanyuk, N. ; Osokin, V. ; Grechanyuk, I. ; Mamuzić, Ilija ; Bukhanovskii, V.V.

Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni

Izvornik
Materials and Metallurgy, Summaries of Lectures / Mamuzić, Ilija - Zagreb : Hrvatsko metalurško društvo, 2004, 216-216

Skup
6. Međunarodni simpozij Hrvatskog metalurškog društva, SHMD 2004 : materijali i metalurgija

Mjesto i datum
Šibenik, Hrvatska, 20-24.07.2004.

Vrsta sudjelovanja
Poster

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Thermal treatment; structure; hardness

Sažetak
The paper presents the results of influence of thermal treatment on structure, hardness, short-term strength, plasticity, and fracture behavior of laminar composite material of the system Cu-Zr-Y-Mo, obtained by the method of electron bombardment evaporation and layer-by-layer condensation from a vapor phase in the temperature range from 290 to 1070 K. It is shown that high-temperature annealing at 1170 K for 3 hours facilitates a 2, 5 … 3 fold increase in the plasticity characteristics of the composite in the temperature range from 290 to 370 K, narrowing of the material hot-brittleness temperature range at about 570 K, and has practically no influence on the material macrostructure, hardness, and strength in the whole temperature range studied.

Izvorni jezik
Engleski

Znanstvena područja
Metalurgija



POVEZANOST RADA


Projekt / tema
0124001

Ustanove
Metalurški fakultet, Sisak

Autor s matičnim brojem:
Ilija Mamuzić, (27862)