Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

One Approach to the Specification of Adhesive Properties of Adhesive Joints (CROSBI ID 497924)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Matejiček, Franjo ; Lucić, Mirjana One Approach to the Specification of Adhesive Properties of Adhesive Joints // Proceedings of 21st Danubia-Adria Symposium on Experimental Methods in Solid Mechanics / Jecić, Stjepan ; Semenski, Damir (ur.). Zagreb: Hrvatsko društvo za mehaniku (HDM), 2004. str. 168-169-x

Podaci o odgovornosti

Matejiček, Franjo ; Lucić, Mirjana

engleski

One Approach to the Specification of Adhesive Properties of Adhesive Joints

Single lap adhesively bonded joint was considered in this paper as one of the most applied joint design in engineering practice. Joints are made with three adherend materials (aluminium, brass and stainless steel) and one type of adhesive: two component high-strength engineering adhesive. This paper deals with the phenomenological approach of determination of adhesive characteristics in adhesive joints. The major idea of authors is that by describing of adhesive properties E and ν are continuous, and Re and En' (tangent modulus of n material) are changing. An assumption is that adhesive forces strongly depend on materials which have to be bonded and have an influence on different behaviour of adhesive.

adhesive bonding; single-lap adhesive joints; stress-strain diagram of adhesive

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

168-169-x.

2004.

objavljeno

Podaci o matičnoj publikaciji

Proceedings of 21st Danubia-Adria Symposium on Experimental Methods in Solid Mechanics

Jecić, Stjepan ; Semenski, Damir

Zagreb: Hrvatsko društvo za mehaniku (HDM)

Podaci o skupu

Symposium on Experimental Methods in Solid Mechanics

poster

29.09.2004-02.10.2004

Brijuni, Hrvatska; Pula, Hrvatska

Povezanost rada

Strojarstvo