CUTTING FORCES BY TURNING IN DEPENDENCE OF ENTRY ANGLE (CROSBI ID 497748)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Udiljak, Toma ; Škorić, Stephan ; Ciglar, Damir
engleski
CUTTING FORCES BY TURNING IN DEPENDENCE OF ENTRY ANGLE
Machinability is assessed by a set of criteria or machinability functions, the knowledge of which is necessary in optimising the machining process. New materials of the cutting tools and new concepts of the machine tools provide new possibilities and cause quantitative changes in machinability functions. This work has studied the cutting forces function, as one of the crucial functions of machinability. The research was done by longitudinal turning the steel 16MnCr5, using the tools made of coated carbides, without the usage of coolants. Obtained results confirm that entry angle significantly influence thrust cutting force, Fp, and therefore is one of the key factors when turning workpieces with high ratio l/d.
cutting forces; turning; entry angle; cutting data
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
199-202-x.
2004.
objavljeno
Podaci o matičnoj publikaciji
PROCEEDINGS, 3rd DAAAM International Conference - ATDC'04
Katalinić, Branko ; Veža, Ivica
Split:
Podaci o skupu
3rd DAAAM International Conference - ATDC'04
predavanje
23.06.2004-26.06.2004
Split, Hrvatska