engleski

Influence of Process Parameters on Axial Breaking Force of parts Produced by Selective Laser Sintering Process

One of the most significant process failures of Selective Laser Sintering - SLS is impossibility of full-real load of the produced parts-ptototypes and because of that there is no possibility to make correctly measurements and gain satisfactory results. Influence on process parameters is analysed in this paper (laser power and scan velocity), as well as post processing influence on value of axial breaking force of the parts produced by SLS process using material DM50-V2, on machine EOSIMT M250, producer EOS Munich, Germany.

Selective Laser Sintering; force; process parameters

nije evidentirano