Napredna pretraga

Pregled bibliografske jedinice broj: 150420

Numerical analysis of stresses in adherend of single-lap adhesive joints


Raos, Pero; Matejiček, Franjo; Lucić, Mirjana
Numerical analysis of stresses in adherend of single-lap adhesive joints // Proceedings the 3rd DAAAM International Conference on ATDC '04 / Katalinić, B. ; Veža, I. ; Bilić, B. (ur.).
Split ; Vienna: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture ; DAAAM International, 2004. str. 171-176 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


Naslov
Numerical analysis of stresses in adherend of single-lap adhesive joints

Autori
Raos, Pero ; Matejiček, Franjo ; Lucić, Mirjana

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings the 3rd DAAAM International Conference on ATDC '04 / Katalinić, B. ; Veža, I. ; Bilić, B. - Split ; Vienna : University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture ; DAAAM International, 2004, 171-176

Skup
Advanced Technologies for Developing Countries

Mjesto i datum
Trogir, Croatia, 23-26.06.2004.

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Adhesive bonding; single-lap joints; finite element method; numerical analysis

Sažetak
This paper deals with modelling of single lap adhesive bonded joints, at which true physical characteristics of adhesive have been considered and lap length has been changed. The experimental specimens have been made of two types of adherend material: stainless steel X5CrNi18-10 and aluminium Al99.5. Dimensions of prepared adherend plates are a b s = 30  90  1, 95 mm. All bonded joints have been realized using an engineering two-component epoxy adhesive. Such prepared joints have been stretched up to the break in the jaws of the tensile testing machine. The true diagram of stresses of adherend (metals) has been considered and comparison of data (applied force vs. end displacement) obtained with numerical analysis and experimental investigation. The results of both of them are in a good correlation. This investigation is a part of continuously testing of adhesive bonded joints.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Projekt / tema
0152011
152002

Ustanove
Strojarski fakultet, Slavonski Brod