Numerical analysis of stresses in adherend of single-lap adhesive joints (CROSBI ID 497015)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Raos, Pero ; Matejiček, Franjo ; Lucić, Mirjana
engleski
Numerical analysis of stresses in adherend of single-lap adhesive joints
This paper deals with modelling of single lap adhesive bonded joints, at which true physical characteristics of adhesive have been considered and lap length has been changed. The experimental specimens have been made of two types of adherend material: stainless steel X5CrNi18-10 and aluminium Al99.5. Dimensions of prepared adherend plates are a b s = 30  90  1, 95 mm. All bonded joints have been realized using an engineering two-component epoxy adhesive. Such prepared joints have been stretched up to the break in the jaws of the tensile testing machine. The true diagram of stresses of adherend (metals) has been considered and comparison of data (applied force vs. end displacement) obtained with numerical analysis and experimental investigation. The results of both of them are in a good correlation. This investigation is a part of continuously testing of adhesive bonded joints.
adhesive bonding; single-lap joints; finite element method; numerical analysis
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
171-176-x.
2004.
objavljeno
Podaci o matičnoj publikaciji
Proceedings the 3rd DAAAM International Conference on ATDC '04
Katalinić, B. ; Veža, I. ; Bilić, B.
Split : Beč: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture ; DAAAM International
Podaci o skupu
Advanced Technologies for Developing Countries
predavanje
23.06.2004-26.06.2004
Split, Hrvatska