Influence of Talc and SEBS-g-MA on PP/SEBS-g-MA/Talc Composites under the Gamma Irradiation Sterilization Conditions (CROSBI ID 104340)
Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Denac, Matjaž ; Musil, Vojko ; Ranogajec, Franjo ; Šmit, Ivan
engleski
Influence of Talc and SEBS-g-MA on PP/SEBS-g-MA/Talc Composites under the Gamma Irradiation Sterilization Conditions
Among thermoplastics, the polypropylene is outstanding with respect to its attractive combination of low cost, low weight, heat distortion temperature above 100°C, and extraordinary versatility in terms of properties and applications. With the appropriate modification, it is possible to improve the existing properties of the iPP, or even obtain the new ones. As a result of its originally superior properties, the PP is commonly used in medical purposes, where it has to undergo the process of sterilization beforehand. The sterilization of the PP in medicine is most often being carried out with low dose of gamma irradiation, which can influence the changes of properties of both, the polymeric matrix and modifiers. Therefore, the purpose of our research work was to determine the mechanical properties of unirradiated and gamma irradiated iPP composites with talc filler and poly-(styrene-b-ethylene-co-butylene-b-styrene) block copolymer, grafted with maleic anhydride (SEBS-g-MA) as elastomeric modifiers, as well as of corresponding binary blends. Unirradiated and gamma irradiated composites and blends were characterized by tensile measurements, measurements of notched impact strength and FTIR spectroscopy. The effects of composition and gamma irradiation on the properties of the iPP composites and blends are discussed, with emphasis on the study of the stabilizing effect of talc in irradiated iPP composites.
gamma irradiation; isotactic poly(propylene); mechanical properties; SEBS-g-MA; talc
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano