Napredna pretraga

Pregled bibliografske jedinice broj: 140415

INFLUENCE OF LAMINATION ANGLES ON THE STRESSES AND STRAINS VALUES IN THE LAMINATED COMPOSITE PLATES


Vnučec, Zdravko
INFLUENCE OF LAMINATION ANGLES ON THE STRESSES AND STRAINS VALUES IN THE LAMINATED COMPOSITE PLATES // ATDC&#8217 ; 02 Proceedings of the 1st DAAAM International Conference on Advanced Technologies for Developing Countries / Katalinić, Branko (TU Vienna, Austria) & Kljajin, Milan (TU Osijek, Croatia) (ur.).
Slavonski Brod, Hrvatska: DAAAM International Vienna ; University of Josip Juraj Strossmayer in Osijek ; Mechanical Engineering Faculty in Slavonski Brod ; Grafika Osijek, 2002. str. 93-98 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


Naslov
INFLUENCE OF LAMINATION ANGLES ON THE STRESSES AND STRAINS VALUES IN THE LAMINATED COMPOSITE PLATES

Autori
Vnučec, Zdravko

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
ATDC&#8217 ; 02 Proceedings of the 1st DAAAM International Conference on Advanced Technologies for Developing Countries / Katalinić, Branko (TU Vienna, Austria) & Kljajin, Milan (TU Osijek, Croatia) - Slavonski Brod, Hrvatska : DAAAM International Vienna ; University of Josip Juraj Strossmayer in Osijek ; Mechanical Engineering Faculty in Slavonski Brod ; Grafika Osijek, 2002, 93-98

Skup
1st DAAAM International Conference on Advanced Technologies for Developing Countries

Mjesto i datum
Slavonski Brod, Hrvatska, 12.-14.09.2002.

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Laminated composite plate; classical lamination theory; strain; stress

Sažetak
In this paper, a numerical investigation of engineering properties of laminated plates and the stress-strain analysis for various lamination angles of continuous fiber composite laminates are studied. The individual continuous fiber/matrix laminas are oriented in the required directions and bonded together to form a laminate plate. By using the terms of classical lamination theory and Hooke&#8217 ; s law, the numerical estimate of the stress and strain values of three different angle-ply four-layered symmetric laminated plates for various lamination angles (+-alfa)s of laminas is carried out. In the examples, the analyzed laminates have been composed of unidirectional laminas made of three characteristic composite materials: reinforcement fibers of E-glass, graphite and Kevlar49, respectively and as matrix material epoxy resin were used. The calculated results of the stress-strain distributions in the layers for three analyzed laminated plates subjected to known the force resultant Nx are presented graphically in diagrams.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Projekt / tema
0152015

Ustanove
Strojarski fakultet, Slavonski Brod

Autor s matičnim brojem:
Zdravko Vnučec, (52733)