Napredna pretraga

Pregled bibliografske jedinice broj: 140307

The identification of marine diesel engine process for diagnostic purpose by means of experiment and simulation


Antonić, Radovan; Vukić, Zoran; Kuljača, Ognjen
The identification of marine diesel engine process for diagnostic purpose by means of experiment and simulation // Proceedings of 7th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology : TMT 2003 / Calvet, Joan Vivanos ; Sales, Ferran Puerta ; Ekinović, Sabahudin ; Brdarević, Safet (ur.).
Barcelona: Universitat Politecnica de Catalunya, 2003. str. 877-880 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


Naslov
The identification of marine diesel engine process for diagnostic purpose by means of experiment and simulation

Autori
Antonić, Radovan ; Vukić, Zoran ; Kuljača, Ognjen

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings of 7th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology : TMT 2003 / Calvet, Joan Vivanos ; Sales, Ferran Puerta ; Ekinović, Sabahudin ; Brdarević, Safet - Barcelona : Universitat Politecnica de Catalunya, 2003, 877-880

ISBN
9958-617-18-8

Skup
7th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology : TMT 2003

Mjesto i datum
Loret de Mar, Španjolska, 15-17.09.2003

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Marine diesel engine; signal acquisition; experimental identification; simulation

Sažetak
The paper deals with the identification of 2-stroke marine diesel engine process. Two methods used: one based on experimental data and other on simulation data. The practical and cost effective solution for direct on-line cylinder pressure measurement on marine diesel engine test bed has been given and a part of the results are presented for large ship's propulsion engine of type MAN B&W. Practical experiments were done during engine testing procedure on test bed in shipyard Split. The other effective method for engine process identification, especially in faulty condition, is simulation one. The simulation example with a scenario of faulty condition in negine cylinder is analysed within real ship's propulsion plant simulator "Norcontrol PPS2000".

Izvorni jezik
Engleski

Znanstvena područja
Elektrotehnika



POVEZANOST RADA


Projekt / tema
0036010

Ustanove
Fakultet elektrotehnike i računarstva, Zagreb