Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Surface Modification and Properties of Thin Ink Films with Added TiO2 and ZnO Nanoparticles Applied on Paperboard Substrates (CROSBI ID 318901)

Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija

Mahović Poljaček, Sanja ; Tomašegović, Tamara ; Strižić Jakovljević, Maja ; Donevski, Davor Surface Modification and Properties of Thin Ink Films with Added TiO2 and ZnO Nanoparticles Applied on Paperboard Substrates // Materials, 16 (2023), 2; 478-499. doi: 10.3390/ma16020478

Podaci o odgovornosti

Mahović Poljaček, Sanja ; Tomašegović, Tamara ; Strižić Jakovljević, Maja ; Donevski, Davor

engleski

Surface Modification and Properties of Thin Ink Films with Added TiO2 and ZnO Nanoparticles Applied on Paperboard Substrates

In this study, the surface modification of thin ink films with added nanoparticles was used to improve the functional properties of ink applied on paperboard substrates. The surface modification was performed by additional exposure of the samples to xenon radiation. Anatase TiO2, rutile TiO2 and ZnO were added to the base ink. The effect of surface modification on the surface, structural, and mechanical properties of the printed ink films was determined by FTIR-ATR spectroscopy, calculating the surface free energy and adhesion parameters, performing the rub resistance test of the printed samples, and by measuring the resistance to bending. Color measurements on the ink films were performed in order to observe the optical properties of unmodified and modified samples. The results showed that surface modification significantly improved the adhesion properties of the thin ink films and the mechanical properties of the samples. The results obtained on uncoated and coated paperboard showed that the addition of rutile TiO2 and ZnO nanoparticles had the greatest effect on the rub resistance of the ink films. The results of the color analysis showed that the addition of nanoparticles did not change the optical properties of the modified ink films and that rutile TiO2 and ZnO nanoparticles improved the lightfastness of the applied ink films.

surface modification ; ink films ; TiO2 and ZnO nanoparticles ; paperboard

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

16 (2)

2023.

478-499

objavljeno

1996-1944

10.3390/ma16020478

Trošak objave rada u otvorenom pristupu

APC

Povezanost rada

Grafička tehnologija

Poveznice
Indeksiranost