Sintering of agglomerate during separate preparation of the charge (CROSBI ID 730156)
Prilog sa skupa u časopisu | sažetak izlaganja sa skupa | međunarodna recenzija
Podaci o odgovornosti
Bochka, V. V. ; Yaholnyk, М. V. ; Sova, A. V. ; Mamuzić, Ilija ; Fursov, M. O. ; Malenko, K. I.
engleski
Sintering of agglomerate during separate preparation of the charge
The paper presents the results of research into a common and separate method of preparing a charge for sintering agglomerate. The best quality of the agglomerate was ensured by separate lumping of the “concentrate-ore-limelimestone” composite, the basicity of which was 0.9-1.0 units, and the residual charge with the basicity of 1.6-1.8 units, after which both composites are mixed in parallel. Then their joint granulation takes place. Fuel is supplied at the end of granulation. Sintering of the agglomerate prepared by the proposed method allows to increase the yield of suitable agglomerate by 10.25 % and to reduce the content of the 0-5 mm fraction after the strength test by 11 %.
sintering agglomerate ; charge preparation
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
322-322.
2023.
nije evidentirano
objavljeno
Podaci o matičnoj publikaciji
Metalurgija
Mamuzić, Ilija
Zagreb: Hrvatsko metalurško društvo
0543-5846
1334-2576
Podaci o skupu
16th International Symposium of Croatian Metallurgical Society - SHMD '2023, Materials and metallurgy
predavanje
20.04.2023-21.04.2023
Zagreb, Hrvatska
Povezanost rada
Metalurgija