Sand-sodium-silicate mixtures steam-microwave structuring technological peculiarities (CROSBI ID 730154)
Prilog sa skupa u časopisu | sažetak izlaganja sa skupa | međunarodna recenzija
Podaci o odgovornosti
Solonenko, L. I. ; Repiakh, S. I. ; Uzlov, K. I. ; Mamuzić, Ilija
engleski
Sand-sodium-silicate mixtures steam-microwave structuring technological peculiarities
Steam-microwave structured sand-sodium-silicate mixtures highest technological properties have been obtained under conditions if they are initially in free-flowing state, used sand is mainly fractions of 0, 16 ... 0, 20 mm and, after cladding with sodium silicate solute, sieved through sieve with 0.315 mm mesh. For structuring, water steam should be fed into mixture as water charges. Their location in rigging allows the water steam, released from them, to move in direction from rigging dead-end parts to mixture open surface. Water mass single water charge is 1 ... 3 g of water per 2, 5 kg of mixture. When structuring, do not allow interruption of microwave radiation influence on mixture for more than 20 ... 30 seconds before it ends.
steam-microwave structuring ; sand-sodium-silicate mixtures
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
321-321.
2023.
nije evidentirano
objavljeno
Podaci o matičnoj publikaciji
Metalurgija
Mamuzić, Ilija
Zagreb: Hrvatsko metalurško društvo
0543-5846
1334-2576
Podaci o skupu
16th International Symposium of Croatian Metallurgical Society - SHMD '2023, Materials and metallurgy
predavanje
20.04.2023-21.04.2023
Zagreb, Hrvatska
Povezanost rada
Metalurgija