Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

A Simple XUV Source at 13.5 nm Based on Ablative Capillary Discharge (CROSBI ID 101640)

Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija

Andreić, Željko ; Ellwi, Samir Shakir ; Pleslić, Sanda ; Kunze, Hans-Joachim A Simple XUV Source at 13.5 nm Based on Ablative Capillary Discharge // Surface review and letters, 9 (2002), 1; 627-630-x

Podaci o odgovornosti

Andreić, Željko ; Ellwi, Samir Shakir ; Pleslić, Sanda ; Kunze, Hans-Joachim

engleski

A Simple XUV Source at 13.5 nm Based on Ablative Capillary Discharge

An XUV source that produces strong emission band at a wavelength of 13.5 nm with a FWHM of 0.6 nm and a duration of about 100 ns is described in this study. In particular this wavelength has attracted the attention of many scientists working in the field by being a good candidate for the development of XUV lithography. The source was generated by using an ablative capillary discharge where the capillary was made of PVC (polyvinyl chloride). A remarkable burst of radiation at the above mentioned wavelength was recorded, the intensity of the radiation being higher by a factor of 10 in the spectral region of interest, as compared to usually used capillaries made of POM (polyacetal), or to recently developed capillary discharges in noble gases.Total XUV radiation energy of up to 50 mJ per pulse seems to be possible with such a device. Due to its simplicity, the described capillary discharge is a good candidate for a simple incoherent XUV source at 13.5 nm.

Ablative capillary discharge; XUV radiation source

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

9 (1)

2002.

627-630-x

objavljeno

0218-625X

Povezanost rada

Fizika

Indeksiranost