engleski

Potentiometric Determination of Free Fluoride Content in Wines from Dalmatia Region (Croatia)—A Comparative Study of Direct Potentiometry and Standard Addition Method

The aim of this study was to investigate 30 different types of Dalmatian wines as a potential source of fluoride. A fluoride ion selective electrode was used to measure the fluoride concentration in each sample. The direct potentiometric method and the standard addition method were evaluated, the latter being suggested as more accurate and precise. Measurements were performed in two buffers, acetate buffer and total ionic strength adjustment buffer (TISAB), to compare their influence on fluoride determination. The obtained results show that TISAB is a better choice than acetate buffer as a medium for fluoride determination. According to the proposed method, mass concentrations of fluoride of 0.19 and 0.18 mg/L were found in the studied red and white wines, with standard deviations of 0.04 and 0.03 mg/L, respectively. All determined fluorine levels in the tested wines were within the recommended limits and do not pose a risk to human health. No significant difference was found between the fluorine content in white and red wines, but there was a difference depending on the place of origin of the wine. The measured pH values for all the wines studied (except one sample) are very similar and show no significant correlation with the fluoride content.

wine ; fluoride ; potentiometry

nije evidentirano