Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 122789

The influence of wood moisture content on the process of circular rip-sawing. Part I : power requirements and specific cutting forces


Beljo-Lučić, Ružica; Goglia, Vlado; Pervan, Stjepan; Đukić, Igor; Risović, Stjepan
The influence of wood moisture content on the process of circular rip-sawing. Part I : power requirements and specific cutting forces // Wood research (Bratislava), 49 (2004), 1; 41-49 (međunarodna recenzija, članak, znanstveni)


CROSBI ID: 122789 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
The influence of wood moisture content on the process of circular rip-sawing. Part I : power requirements and specific cutting forces

Autori
Beljo-Lučić, Ružica ; Goglia, Vlado ; Pervan, Stjepan ; Đukić, Igor ; Risović, Stjepan

Izvornik
Wood research (Bratislava) (1336-4561) 49 (2004), 1; 41-49

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
circular saw; wood moisture content; power requirements; specific cutting forces

Sažetak
This paper presents the results of research on power requirements during conventional sawing of oakwood (Quercus Robur L.) on a circular saw for rip-sawing. The major parameters affecting the cutting power are the basic density and the nature of wood species, wood moisture content, feed direction, feed rate, cutting depth and kerf width. The concerned variables in this research were wood moisture content, cutting depth and feed rate. The cutting speed and tool parameters remain constant. Directions of cutting with regard to grain directions were approximately the same for each cutting depth. Cutting power was measured for a specific condition of wood and machine parameters and specific cutting forces were estimated. Specific cutting forces during sawing of green wood are less than specific cutting forces of kiln dried wood and frozen wood. Research results indicate a significant decrease of specific cutting forces in sawing green wood in transversal direction (90º ; ; -90º ; ).

Izvorni jezik
Engleski

Znanstvena područja
Šumarstvo



POVEZANOST RADA


Projekti:
0068137
0068139

Ustanove:
Šumarski fakultet, Zagreb

Citiraj ovu publikaciju

Beljo-Lučić, Ružica; Goglia, Vlado; Pervan, Stjepan; Đukić, Igor; Risović, Stjepan
The influence of wood moisture content on the process of circular rip-sawing. Part I : power requirements and specific cutting forces // Wood research (Bratislava), 49 (2004), 1; 41-49 (međunarodna recenzija, članak, znanstveni)
Beljo-Lučić, R., Goglia, V., Pervan, S., Đukić, I. & Risović, S. (2004) The influence of wood moisture content on the process of circular rip-sawing. Part I : power requirements and specific cutting forces. Wood research (Bratislava), 49 (1), 41-49.
@article{article, year = {2004}, pages = {41-49}, keywords = {circular saw, wood moisture content, power requirements, specific cutting forces}, journal = {Wood research (Bratislava)}, volume = {49}, number = {1}, issn = {1336-4561}, title = {The influence of wood moisture content on the process of circular rip-sawing. Part I : power requirements and specific cutting forces}, keyword = {circular saw, wood moisture content, power requirements, specific cutting forces} }

Časopis indeksira:


  • Web of Science Core Collection (WoSCC)
    • Science Citation Index Expanded (SCI-EXP)
    • SCI-EXP, SSCI i/ili A&HCI
  • Scopus





Contrast
Increase Font
Decrease Font
Dyslexic Font