Influence of layer thickness on corrosion protection properties of multi-layer coating system (CROSBI ID 726358)
Prilog sa skupa u zborniku | kratko priopćenje | međunarodna recenzija
Podaci o odgovornosti
Stojanović, Ivan ; Turkalj, Lovro ; Cindrić, Ivan ; Juraga, Ivan ; Alar, Vesna ; Šimunović, Vinko ; Kurtela, Marin ; Franjić, Hrvoje
engleski
Influence of layer thickness on corrosion protection properties of multi-layer coating system
Most common method of corrosion protection in shipbuilding is the application of organic coatings, which in addition to the corrosion protection role can have various other requirements depending on the protected part of the structure. In this paper, a solvent-borne coating system dried by infrared (IR) radiation consisted of epoxy primer, epoxy intermediate coat, and polyurethane topcoat, with the difference in achieving rec- ommended primer and topcoat thickness, was studied. Analysed coating system is used for coating ship decks, as well as other marine superstructures such as on offshore facil- ities and wind farms. The results point out better overall protective properties of coating system with thicker topcoat.
corrosion ; coating ; salt chamber ; IR curing ; EIS ; adhesion test
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
91-92.
2022.
objavljeno
Podaci o matičnoj publikaciji
SORTA 2022
Degiuli, Nastia ; Martić, Ivana ; Farkas, Andrea
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu
978-953-7738-86-0
Podaci o skupu
25th Symposium on Theory and Practice of Shipbuilding, In Memoriam prof. Leopold Sorta (SORTA 2022)
predavanje
07.09.2022-10.09.2022
Malinska, Hrvatska