Simulation of First Layer Adhesion Errors in 3D printing (CROSBI ID 726195)
Prilog sa skupa u zborniku | stručni rad | međunarodna recenzija
Podaci o odgovornosti
Šantak, Ivor ; Duspara, Miroslav ; Cumin, Josip ; Kovačević, Božidar ; Maglić, Leon ; Stoić, Antun
engleski
Simulation of First Layer Adhesion Errors in 3D printing
The main purpose of this paper is to explore parameters that affect first layer adhesion to print bed by simulating errors. Research was conducted on modified Velleman K8200 3D printer. Prior to research, 3D model of low surface area object was made. Parameters used for research were : temperature of the nozzle, temperature of heated bed, 3D printing speed and nozzle height. After the research, it is concluded that higher nozzle and heated bed temperatures affects first layer adhesion in a positive way. Lower nozzle height and speed also increase first layer print quality.
First layer adhesion, 3D printing, 3D print quality, calibration, optimal 3D printing settings
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
307-315.
2022.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of the 10 th International Scientific and Expert Conference TEAM 2022
Damjanović, Darko ; Stojšić, Josip ; Mirosavljević, Krunoslav ; Sivrić, Hrvoje
Slavonski Brod: Sveučilište u Slavonskom Brodu
1847-9065
Podaci o skupu
10th International Scientific and Expert Conference TEAM2022
predavanje
21.09.2022-22.09.2022
Slavonski Brod, Hrvatska