Improvement of resistance to sliding wear by nitriding the bearing steel EN DIN 100Cr6 (CROSBI ID 725296)
Prilog sa skupa u zborniku | stručni rad | domaća recenzija
Podaci o odgovornosti
Landek, Darko ; Cerovečki, Josip
engleski
Improvement of resistance to sliding wear by nitriding the bearing steel EN DIN 100Cr6
The paper investigates the resistance to adhesive wear of sliding bearings consisting of a nitrided ring made of steel EN DIN 100Cr6 and a bearing pad made of lead bronze. The tested rings were nitrated in a Tenifer salt bath at 580 C/2h and in plasma of ionized gases N2/H2 at 500 C/4h. Roughness measurement and surface hardness testing were performed on the all-test samples. On tribocouples composed of a nitrided ring and a lead bronze prism, the increase in temperature, the mean friction coefficient, and the width of the wear track on the contact surface of the prism were determined after 30 s of wear using the "prism on ring" sliding method under the conditions of dry friction and lubrication with SAE 5W engine oil during 30 s of wear under load with a normal force of 6.31 N and with ring speed 1200 rpm, 1740 rpm and 2500 rpm.
sliding wear, steel EN DIN 100Cr6, plasma nitriding,
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
87-93.
2022.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of the 11th International Conference Mechanical technologies and structural materials 2022
Jozić, Sonja ; Lela, Branimir ; Gjeldum, Nikola
Split: Hrvatsko društvo za zaštitu materijala (HDZaMa)
1847-7917
Podaci o skupu
11th International Conference Mechanical Technologies and Structural Materials (MTSM 2022)
poster
22.09.2022-23.09.2022
Split, Hrvatska