EFFECT OF THE SHAPE AND STRUCTURE OF MATURITY SENSOR’S PLASTIC HOUSING ON ITS PHYSICO-MECHANICAL PROPERTIES (CROSBI ID 315030)
Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Utepov, Yelbek ; Akhazhanov, Sungat ; Aniskin, Aleksej ; Zharassov, Shyngys
engleski
EFFECT OF THE SHAPE AND STRUCTURE OF MATURITY SENSOR’S PLASTIC HOUSING ON ITS PHYSICO-MECHANICAL PROPERTIES
This paper presents how the shape and physical structure of the connections affect the performance of the housing of maturity sensor. A two parts rectangular and a keg-shaped cylindrical configurations of plastic housings were sequentially tested for water, shock and load resistance. The tests revealed the weak ingress and shock resistance of the rectangular housing, in comparison with cylindrical one, where no serious defects were identified. Both types of housings performed well during the compression tests on all three sides, showing the bearing capacities from 0.6 to 2.11 kPa, which are equivalent to 65.3 and 165.3 kg of human mass. Based on the results, the study demonstrates an easy-to-handle workflow for generic testing and evaluation of maturity sensors housing. The proposed workflow may be applicable for other types of small-scaled electronic devices.
non-destructive testing method ; concrete sensor ; housing ; durability ; maturity sensor
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o izdanju
18 (3 (37))
2021.
83-87
objavljeno
1811-1165
2413-2179
10.31489/2021no3/83-87