Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 121886

Tool Condition Monitoring and Control


Stoić, Antun; Kopač, Janez; Cukor, Goran
Tool Condition Monitoring and Control // CIM 2003: Computer Integrated Manufacturing and High Speed Machining / 9th International Scientific Conference on Production Engineering / Cebalo, Roko ; Schulz, Herbert (ur.).
Zagreb: Croatian Association of Production Engineering, 2003. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


CROSBI ID: 121886 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Tool Condition Monitoring and Control

Autori
Stoić, Antun ; Kopač, Janez ; Cukor, Goran

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
CIM 2003: Computer Integrated Manufacturing and High Speed Machining / 9th International Scientific Conference on Production Engineering / Cebalo, Roko ; Schulz, Herbert - Zagreb : Croatian Association of Production Engineering, 2003

Skup
CIM 2003: Computer Integrated Manufacturing and High Speed Machining / 9th International Scientific Conference on Production Engineering

Mjesto i datum
Lumbarda, Hrvatska, 05-06.06.2003

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
tool wear; noise; forces; control; treshold

Sažetak
Many sensors have been used to detect tool failure indirectly, measuring acoustic emission, force, sound, vibration, etc. In these indirect methods, the signal magnitude, root mean square value, or magnitude of the power spectrum, among others, are reported. These values indicate necessity for tool change typically via threshold. To make decision logic works with minimal faults, the control system has to be well trained. The system training results shows influence of cutting speed, feed rate, nose radius of cutting tool and tool wear on noise and forces during turning. The measurements were performed on a heat treatable steel Ck 35 (Č1431), and 40CrMnMo7 steel, when CBN inserts and coated tools were used as cutting material during dry cutting. The results showed that a high possibility in terms of tool wear monitoring exists, especially for a large-scale production.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Projekti:
0069020
0152011

Ustanove:
Tehnički fakultet, Rijeka

Profili:

Avatar Url Goran Cukor (autor)

Avatar Url Antun Stoić (autor)

Citiraj ovu publikaciju

Stoić, Antun; Kopač, Janez; Cukor, Goran
Tool Condition Monitoring and Control // CIM 2003: Computer Integrated Manufacturing and High Speed Machining / 9th International Scientific Conference on Production Engineering / Cebalo, Roko ; Schulz, Herbert (ur.).
Zagreb: Croatian Association of Production Engineering, 2003. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
Stoić, A., Kopač, J. & Cukor, G. (2003) Tool Condition Monitoring and Control. U: Cebalo, R. & Schulz, H. (ur.)CIM 2003: Computer Integrated Manufacturing and High Speed Machining / 9th International Scientific Conference on Production Engineering.
@article{article, year = {2003}, pages = {I-121-131}, keywords = {tool wear, noise, forces, control, treshold}, title = {Tool Condition Monitoring and Control}, keyword = {tool wear, noise, forces, control, treshold}, publisher = {Croatian Association of Production Engineering}, publisherplace = {Lumbarda, Hrvatska} }




Contrast
Increase Font
Decrease Font
Dyslexic Font