INFLUENCE OF 3D PRINTING ORIENTATION ON MECHANICALPROPERTIES OF PLA POLYMERS (CROSBI ID 722626)
Prilog sa skupa u zborniku | stručni rad | međunarodna recenzija
Podaci o odgovornosti
Drvar, Nenad ; Schauperl, Zdravko ; Šečerkadić, Amir ; Rogina, Anamarija ; Ćatić, Amir ; Knez, Marko
engleski
INFLUENCE OF 3D PRINTING ORIENTATION ON MECHANICALPROPERTIES OF PLA POLYMERS
The paper investigates the influence of the 3D printing process, specifically the orientation of the samples on the basic mechanical properties of PLA polymers. The test specimens were printed from MAKERBOT PLA polymers under the same parameters but in three different build orientations. Analysis of the macrostructure of the samples revealed the appearance of "elephant's foot" phenomenon due of the printing process. The tests included static tensile testing, three-point bending, impact toughness and hardness measurement. The obtained results showed significant deviations depending on the build orientation. The analysis of fracture surfaces demonstrated a large alotment of porosity in the structure, which was most likely one of the causes of such dispersion of the obtained results.
3D printing, PLA polymer, printing orientation, mechanical properties
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
397-407.
2021.
objavljeno
Podaci o matičnoj publikaciji
INTERNATIONAL CONFERENCE ON MATERIALS corrosion, heat treatment, materials testing and tribology
Podaci o skupu
International Conference On Materials: corrosion, heat treatment, materials testing and tribology (MTECH 2021)
poster
06.10.2021-09.10.2021
Hrvatska