Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Influence of the Process Input Parameters on the Cross-Wire Weld Breaking Force (CROSBI ID 313297)

Prilog u časopisu | prethodno priopćenje | međunarodna recenzija

Vrtovšnik, Domagoj ; Čabrijan, Ivana ; Brčić, Marino ; Doboviček, Sandro Influence of the Process Input Parameters on the Cross-Wire Weld Breaking Force // Tehnički glasnik, 16 (2022), 2; 227-230. doi: 10.31803/tg-20220405195422

Podaci o odgovornosti

Vrtovšnik, Domagoj ; Čabrijan, Ivana ; Brčić, Marino ; Doboviček, Sandro

engleski

Influence of the Process Input Parameters on the Cross-Wire Weld Breaking Force

Cross-wire welding is a type of electric resistance welding called projection welding that is used in the production of a variety of products. This paper deals with the case where steel wires of equal radii are joined together to form a reinforced steel mesh. The objective of the study is to determine the correlation between the welding parameters and the breaking force of the weld. Each weld is cut out from the given wire mesh and tested separately by destructive testing on the universal testing machine. A modular testing fixture was constructed for the tests. Although the tests are still in the initial stage, the results already give a good insight into the influence of the process input parameters on the breaking strength of the weld.

breaking force ; cross-wire welding ; destructive testing ; electric resistance welding ; projection welding ; welding

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

16 (2)

2022.

227-230

objavljeno

1846-6168

1848-5588

10.31803/tg-20220405195422

Povezanost rada

Strojarstvo

Poveznice