Properties of Aluminium Foams Reinforced with Ceramic Particles (CROSBI ID 720371)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Rodinger, Tomislav ; Ćorić, Danko
engleski
Properties of Aluminium Foams Reinforced with Ceramic Particles
Aluminium foams are materials with a specific combination of properties due to their cellular structure. Unlike monolithic aluminium, foams have a significantly lower mass as a result of porosity. The higher it is, the lower the density and mass, but also the lower the mechanical properties. To improve the mechanical properties of aluminium foams, various ceramic particles can be used as reinforcements, whose content, size and distribution represent a significant factor. If the foam contains an excessive amount of reinforcement particles, it may become brittle. Also, nano-particle ceramic reinforcements tend to agglomerate, causing brittleness in cell wall areas. This article gives an overview of the properties of aluminium foams reinforced with particles of alumina (Al2O3), silicon carbide (SiC), titanium boride (TiB2) and boron carbide (B4C) with special emphasis on their compressive behavior.
aluminium foam ; porosity ; ceramic particles ; compressive strength ; energy apsorption
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
370-377.
2022.
objavljeno
Podaci o matičnoj publikaciji
Conference Proceedings of 22nd International Conference on Materials, Tribology and Recycling - MATRIB 2022
Bušić, Matija ; Leder Horina, Jasna ; Tropša, Vlado
Zagreb: Hrvatsko društvo za materijale i tribologiju (HDMT)
2459-5608
Podaci o skupu
22nd International Conference on Materials (MATRIB 2022)
poster
30.06.2022-02.07.2022
Vela Luka, Hrvatska