engleski

Study of the compression properties of welded seams formed using hot wedge, hot air, ultrasonic, and high-frequency welding techniques

The compression properties of welded seams depending on welding parameters using the hot wedge and hot air welding technique, ultrasonic welding technique, and high-frequency welding technique were studied. The compression properties, expressed by parameters such as compressional energy WC, compressional resilience RC, linearity LC, and compressibility C, are important information about the welded seam quality in terms of touch, voluminosity, stiffness, and flexibility of the welded seam. KES-FB and FAST measurement systems were used to test the compression properties of the welded seams. Based on the analysis of the results obtained, the influence of the welding parameters on the compression properties of the welded seam was determined. The results of the investigation showed that improperly selected welding parameters, such as the supply or introduction of too much heat into the material to be welded or too long exposure of the material in the weld zone to heat, result in welded seams with expressive extrusion edges, which affects the quality of the welded seams. These welded seams have very low values of compressional resilience RC and very high values of compressional energy WC and compressibility C.

Welding, welding parameters, compression properties, hot wedge welding, hot air welding, ultrasonic welding, high-frequency welding

Glavni autori iz područja tekstilne tehnologije: Martina Bobovčan Marcelić i Dubravko Rogale Koresponding autor: Martina Bobovčan Marcelić