Napredna pretraga

Pregled bibliografske jedinice broj: 120386

Analysis of the impact wave influence on the structure of material in the process of shaping material by explosion


Buljan, Stipo; Jurković, Milan; Grizelj, Branko
Analysis of the impact wave influence on the structure of material in the process of shaping material by explosion // Computer Integrated Manufacturing and High Speed Machining ISBN 953-97181-4-7 / Cebalo, Roko ; Schulz, Herbert (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva, 2002. str. IV019-IV027 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


Naslov
Analysis of the impact wave influence on the structure of material in the process of shaping material by explosion

Autori
Buljan, Stipo ; Jurković, Milan ; Grizelj, Branko

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Computer Integrated Manufacturing and High Speed Machining ISBN 953-97181-4-7 / Cebalo, Roko ; Schulz, Herbert - Zagreb : Hrvatska udruga proizvodnog strojarstva, 2002, IV019-IV027

Skup
8th International Scientific Conference on Production Engineering - CIM 2002

Mjesto i datum
Brijuni, Hrvatska, 13-14.06.2002

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Speed of deformation; water as a medium for transmission of energy; austenite structure.

Sažetak
Using explosive as a source of energy in the process of shaping tin-sheet is possible in volume shaping process as well as in other processes of tin-sheet shaping, e.g. making holes, calibration, surface hardening, etc. In this case, a 200-mm bottom made of Č 4580 was being shaped, and the structure of material was examined as well. Speed of detonation was 2994 m/s and 6105 m/s. Explosive used in this case was Vitezit 20, and the medium for transmission of energy was water. Mentioned steel, before it was being shaped, had austenite structure and it belongs to non-magnetic steels, it cannot be tempered, it is hard to be shaped by cutting, but it is good to be drawn.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Projekt / tema
0069021
0152012