Application of FEM in plate bending (CROSBI ID 490854)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Grizelj, Branko ; Kenter, Muhlis ; Math, Miljenko
engleski
Application of FEM in plate bending
The paper is concerned with the numeric procedure in axial-symmetrical plate bending. For numeric procedure the finite element method is used. Calibration force is determined when bending force and calibration coefficient are known. The calibration coefficient is determined by experiments. The axial symmetrical plate bending analysis is restricted to the data used so far in the manufacturing of spherical tanks i.e. to deformation up to 2%. To obtain equations for the calculation of force for axial symmetrical plate bending and displacement during loading procedure andd after its removal, data obtained by finite element method were used. The method of least square was used to interpolate the results. Mathematical procedures were used to obtain equations for the calculation of force and displacements, the equations being of use for solving practical problems.
Axial symmetrical bending; finite element method; calibration of plate
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
573-580-x.
2003.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of International Conference on Sheet Metal 2003
U.P. Singh, M. Geiger, H.J.J. Kals, B. Shirvani
Jordanstown: University of Ulster and Univeersity of Erlangen
Podaci o skupu
International Conference on Sheet Metal
predavanje
14.04.2003-16.04.2003
Ulster, Ujedinjeno Kraljevstvo