Research of Working Postures in the Technological Sewing Process Using the REBA Method (CROSBI ID 714787)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Kirin, Snježana ; Hursa Šajatović, Anica
engleski
Research of Working Postures in the Technological Sewing Process Using the REBA Method
The characteristics of the work in the technological sewing process depend on the type and character of the workpiece, the type of the sewing machine used to perform the technological operation, as well as on the training and skills of the worker. In the technological sewing process, the work is performed in a sitting position at the sewing machine, whereby the worker performs hand and/or machine-hand technological suboperations. During the performing of technological operations, the worker uses her hands and torso to handle the workpiece, and the feet to operate the sewing machine pedal at short intervals with continuous repetition throughout the work shift, subjecting the worker to stress. The paper analyses the working position at nine workplaces in the technological sewing process using the REBA method (Rapid Entire Body Assessment). The analysis of the results showed that there is workload (medium or high risk) at all workplaces that requires workplace adaptation in the form of workplace redesign. The redesign of workplaces involves adapting the dimensions of the workplace to the worker’s height and determining a more favourable working method that achieves a lower workload.
REBA method ; Technological process of sewing ; Worker workload
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
111-119.
2021.
objavljeno
10.1007/978-3-030-66937-9_13
Podaci o matičnoj publikaciji
Sumpor, Davor ; Jambrošić, Kristian ; Jurčević Lulić, Tanja ; Milčić, Diana ; Salopek Čubrić, Ivana ; Šabarić, Irena
Springer
978-3-030-66936-2
Podaci o skupu
Nepoznat skup
predavanje
29.02.1904-29.02.2096