Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Comparison of Gear Tooth-Root Stresses Obtained by Different Numerical Models (CROSBI ID 490491)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Marunić, Gordana Comparison of Gear Tooth-Root Stresses Obtained by Different Numerical Models // Proceedings of the 2nd DAAAM International Conference on Advanced Technologies for Developing Countries / Katalinić, B ; Tufekčić, Dž. ; Šelo, R. (ur.). Tuzla: University of Tuzla Faculty of Mechanical Engineering in Tuzla ; DAAAM International Vienna, 2003. str. 53-58-x

Podaci o odgovornosti

Marunić, Gordana

engleski

Comparison of Gear Tooth-Root Stresses Obtained by Different Numerical Models

Maximum tensile spur gear tooth-root stress determined by use of numerical models based upon 2D and 3D approach, and calculated by means of different methods, has been the subject of the analysis. The comparison has been made of the obtained stress results and nominal tooth-root stress values according to the standard ISO 6336-3. From the standpoint of the gear geometrical parameters, such are the number of teeth, rim thickness and tooth facewidth, the derived conclusions can faciliate the choice of adequate spur gear numerical model.

Spur gear; Tooth-root stress; Numerical model

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

53-58-x.

2003.

nije evidentirano

objavljeno

Podaci o matičnoj publikaciji

Proceedings of the 2nd DAAAM International Conference on Advanced Technologies for Developing Countries

Katalinić, B ; Tufekčić, Dž. ; Šelo, R.

Tuzla: University of Tuzla Faculty of Mechanical Engineering in Tuzla ; DAAAM International Vienna

Podaci o skupu

2nd DAAAM International Conference on Advanced Technologies for Developing Countries

predavanje

25.06.2003-28.06.2003

Tuzla, Bosna i Hercegovina

Povezanost rada

Strojarstvo