Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 117524

Load Capacity of the Tooth Root in Internal High Transverse Contact Ratio Involute Gearing


Križan, Božidar; Lovrin, Neven; Franulović, Marina
Load Capacity of the Tooth Root in Internal High Transverse Contact Ratio Involute Gearing // The 17th International Conference on Production Research, Electronic Proceedings / Deisenroth, Michael P. (ur.).
Blacksburg, Virginia, USA: Virginia Polytechnic Institute and State University, 2003. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


CROSBI ID: 117524 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Load Capacity of the Tooth Root in Internal High Transverse Contact Ratio Involute Gearing

Autori
Križan, Božidar ; Lovrin, Neven ; Franulović, Marina

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
The 17th International Conference on Production Research, Electronic Proceedings / Deisenroth, Michael P. - Blacksburg, Virginia, USA : Virginia Polytechnic Institute and State University, 2003

Skup
The 17th International Conference on Production Research Enterprise Integration: A Production Perspective

Mjesto i datum
Blacksburg, Virginia, Sjedenjene Američke Države, 03-07.08.2003

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
finite element method; high transverse contact ratio; involute toothing; tooth root stress

Sažetak
This paper deals with the analysis of the load capacity, i.e. tooth root stress in internal high transverse contact ratio involute gearing. On the basis of the theoretical load distribution, the tooth root stress along the path of contact has been calculated. The theoretical values of the tooth root stresses are checked, i.e. compared with the real values obtained by using the Finite Element Method. The maximal theoretical and real value of the tooth root stress along the path of contact has been compared with the calculation of tooth root stress according to the German Standard DIN 3990. It is evident that the DIN-Standard procedure on average gives higher values of the tooth root stresses in comparison with the real values obtained by using the Finite Element Method.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Projekti:
0069019

Profili:

Avatar Url Božidar Križan (autor)

Avatar Url Marina Franulović (autor)

Avatar Url Neven Lovrin (autor)


Citiraj ovu publikaciju:

Križan, Božidar; Lovrin, Neven; Franulović, Marina
Load Capacity of the Tooth Root in Internal High Transverse Contact Ratio Involute Gearing // The 17th International Conference on Production Research, Electronic Proceedings / Deisenroth, Michael P. (ur.).
Blacksburg, Virginia, USA: Virginia Polytechnic Institute and State University, 2003. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
Križan, B., Lovrin, N. & Franulović, M. (2003) Load Capacity of the Tooth Root in Internal High Transverse Contact Ratio Involute Gearing. U: Deisenroth, M. (ur.)The 17th International Conference on Production Research, Electronic Proceedings.
@article{article, author = {Kri\v{z}an, Bo\v{z}idar and Lovrin, Neven and Franulovi\'{c}, Marina}, editor = {Deisenroth, M.}, year = {2003}, keywords = {finite element method, high transverse contact ratio, involute toothing, tooth root stress}, title = {Load Capacity of the Tooth Root in Internal High Transverse Contact Ratio Involute Gearing}, keyword = {finite element method, high transverse contact ratio, involute toothing, tooth root stress}, publisher = {Virginia Polytechnic Institute and State University}, publisherplace = {Blacksburg, Virginia, Sjedenjene Ameri\v{c}ke Dr\v{z}ave} }
@article{article, author = {Kri\v{z}an, Bo\v{z}idar and Lovrin, Neven and Franulovi\'{c}, Marina}, editor = {Deisenroth, M.}, year = {2003}, keywords = {finite element method, high transverse contact ratio, involute toothing, tooth root stress}, title = {Load Capacity of the Tooth Root in Internal High Transverse Contact Ratio Involute Gearing}, keyword = {finite element method, high transverse contact ratio, involute toothing, tooth root stress}, publisher = {Virginia Polytechnic Institute and State University}, publisherplace = {Blacksburg, Virginia, Sjedenjene Ameri\v{c}ke Dr\v{z}ave} }




Contrast
Increase Font
Decrease Font
Dyslexic Font