Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

Effect of compression ignition engine preheating on its performance under cold start conditions (CROSBI ID 304642)

Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija

Gęca, Michał ; Radica, Gojmir Effect of compression ignition engine preheating on its performance under cold start conditions // Combustion Engines, 188 (2022), 1; 67, 74. doi: 10.19206/ce-142346

Podaci o odgovornosti

Gęca, Michał ; Radica, Gojmir

engleski

Effect of compression ignition engine preheating on its performance under cold start conditions

This paper examines the effect of an external preheating system for an internal combustion engine on fuel consumption, CO2 emissions, and cabin temperature of a Euro4 vehicle. A 1 kW electric system powered by 220 V was installed in series in the cooling system of a vehicle with a compression- ignition engine of 2.5 dm3 capacity. The tests were carried out in simulated urban driving conditions (distance of 4.2 km), extra-urban driving conditions (distance of 17 km), and during idling at cold-start temperatures ranging from –10oC to 2oC. Preheating the engine under simulated city conditions reduces fuel consumption by 2.64 dm3/100 km and increases the supply air temperature immediately after engine start-up. Due to the preheater being powered from an external power grid, the cost per trip and total CO2 emissions are increased. Assuming renewable energy sources, CO2 emissions would be reduced the most for the stationary tests after engine preheating. In contrast, emissions would be reduced the least for extra-urban driving

internal combustion engine ; engine warm-up ; cold start ; CO2 emissions ; fuel consumption

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

188 (1)

2022.

67

74

objavljeno

2300-9896

10.19206/ce-142346

Povezanost rada

Strojarstvo, Tehnologija prometa i transport

Poveznice