Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

A Study of the Flexural Properties of PA12/Clay Nanocomposites (CROSBI ID 304529)

Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija

Stojšić, Josip ; Raos, Pero ; Milinović, Andrijana ; Damjanović, Darko A Study of the Flexural Properties of PA12/Clay Nanocomposites // Polymers, 14 (2022), 3; 434, 15. doi: 10.3390/polym14030434

Podaci o odgovornosti

Stojšić, Josip ; Raos, Pero ; Milinović, Andrijana ; Damjanović, Darko

engleski

A Study of the Flexural Properties of PA12/Clay Nanocomposites

Polymer nanocomposites consist of a polymer matrix and reinforcing particles that have at least one dimension under 100 nm. The processing of nanocomposite polymers is the most important stage, determining the final properties of nanocomposites. Nanocomposites are now preferentially prepared by melt-mixing using conventional compounding processes such as twin- screw extrusion. Many processing parameters (polymer matrix type, content and type of nanofiller, barrel temperature, screw speed, number and shape of extruder screws, etc.) affect the properties of nanocomposites. This research work represents an investigation of the influence of processing parameters (amount of nanoclay filler, the screw rotation speed, and extruder barrel temperature) on the flexural properties of polyamide 12/nanoclay- reinforced nanocomposite. From the test results, it is apparent that an increase in nanoclay content from 1 to 8% significantly increases flexural strength. The obtained nanocomposite has a 19% higher flexural strength and a 56% higher flexural modulus than pure PA12. Mathematical models that show the dependence of flexural strength and flexural modulus on the processing parameters used were obtained as a result of this analysis.

nanocomposites ; polyamide 12 ; clay ; mechanical properties ; mixing

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

14 (3)

2022.

434

15

objavljeno

2073-4360

10.3390/polym14030434

Trošak objave rada u otvorenom pristupu

Povezanost rada

Strojarstvo

Poveznice
Indeksiranost