Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Electro-Thermal Induction Motor Model (CROSBI ID 712857)

Prilog sa skupa u zborniku | ostalo | međunarodna recenzija

Skeledžija, Adam ; Jerković Štil, Vedrana Electro-Thermal Induction Motor Model // Proceedings of 30th International Conference on Organization and Technology of Maintenance (OTO 2021) / Glavaš, Hrvoje ; Hadzima-Nyarko, Marijana ; Karakašić, Mirko et al. (ur.). Cham: Springer, 2021. str. 160-171 doi: 10.1007/978-3-030-92851-3_12

Podaci o odgovornosti

Skeledžija, Adam ; Jerković Štil, Vedrana

engleski

Electro-Thermal Induction Motor Model

Even though electrical and thermal conditions of any electrical machine are interconnected, in the most cases these conditions are separately analyzed. On the other hand, electrical machines are designed to achieve desired operating point with minimal material cost. Due to increase of load or reduced cooling possibilities, in industrial surrounding electrical machines thus can easily be overheated, shortening the machine life cycle and increasing maintenance costs. With the development of sophisticated control principles, induction motors became the most widely used machines in industry. For all these reasons, in this paper the simple electro-thermal model of induction motor for prediction of motor temperature in different operating conditions is presented. Further on, dynamical behavior of presented model is analyzed through simulations and experimental measurements.

Induction motor ; Electrical model ; Thermal model ; Simulation ; Measurement

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

160-171.

2021.

objavljeno

10.1007/978-3-030-92851-3_12

Podaci o matičnoj publikaciji

Proceedings of 30th International Conference on Organization and Technology of Maintenance (OTO 2021)

Glavaš, Hrvoje ; Hadzima-Nyarko, Marijana ; Karakašić, Mirko ; Ademović, Naida ; Avdaković, Samir

Cham: Springer

978-3-030-92851-3

Podaci o skupu

30th International Conference on Organization and Technology of Maintenance (OTO 2021)

predavanje

10.12.2021-11.12.2021

Osijek, Hrvatska

Povezanost rada

Elektrotehnika

Poveznice